The RTSP and HTTP ports of the DVR/NVR need to be open/port forwarded on your router, in order to connect to the DVR/NVR remotely via Wisenet Mobile or a VMS The RTSP and HTTP ports are 558 and...
The SPC-2001 can be connected directly to a NVRHowever the SPC has two mode, PTZ mode and general control modeTo toggle between these modes you need to press button no 9When in PTZ mode, you c...
SPC-7000 – SSM Connect the SPC-7000 keyboard to the SSM PC using a USB cable plugged in to the SSM socket on the back of the SPC-7000 keyboard. Login to the SPC-7000 keyboard and in SSM open the...
To connecting the SPC-7000 keyboard to a DVR Connect TX+ on DVR to TX+ on port 1 of SPC-7000 Connect TX- on DVR to TX- on port 1 of SPC-7000 Set serial settings on DVR - make sure Baud rate is ...
To export CSLogs from SPD Decoders you can use the below URLs: SPD-151 - <Decoder IP>/web/#/cslog SPD-152 - <Decoder IP>/uwa/#/cslog The SPD-152 also give the option for CORE logs
Direction of CameraThe camera should be mounted overhead and the lens should point 90°, straightdown to optimize the performance of people counting and heatmap feature. If thecamera is mounted...
Devices and software can be checked for ONVIF conformity by visiting: Conformant Products - ONVIF (https://www.onvif.org/conformant-products/) The conformant ONVIF profiles, Software/firmwar...
Many Wisenet cameras offers alarm inputs and outputs, these are TTL outputs and are not volt free, a transistorised relay is required to obtain a volt free output. The PNO-A9081RLP Road-Ai ANPR...
Many Wisenet cameras offers alarm inputs and outputs, these are TTL outputs and are not volt free, a transistorised relay is required to obtain a volt free output. The PNV-A9081RLP Road-Ai ANPR...
Vaxtor is a licenced ANPR application that can be installed directly on supported Wisenet cameras. This is a step-by-step guide for configuring Wave user accounts, Wave rules for bookmarks and th...